Filter
Top Products
Check the flash operation.
• Press the master unit's test firing
button.
t
l
'
The slave unit will fire. If the flash
does not fire, adjust the slave unit's
angle toward the master unit and
distance from the master unit.
Set the camera and shoot.
.'
Set the camera
in
the same way
as
with normal flash shooting.
15m (49.2ft.)
8m (26.2ft.) 12m (39.4ft.)
• Use the mini stand (tripod socket provided) to prop up the slave unit.
\1\ Use the bounce feature to swing the slave unit
so
that its wireless
sensor faces the master unit.
,tt Indoors, the wireless signal can also bounce off the wall
so
there
is
more leeway
in
positioning the slave unit(s).
• After positioning the slave unit(s),
be
sure to test the wireless flash
operation before shooting.
•
Do
not place any obstacles between the master unit and slave
unit(s). Obstacles can block the transmission of wireless signals.
38