Filter
Top Products
Installing the Batteries
Install four size-AA batteries.
Open the cover.
• Use your thumb to press the battery
compartment lock lever, then slide it
as shown by the arrow
CD
to open the
cover.
Install the batteries.
• Make sure the + and - battery
contacts are properly oriented as
shown
in
the compartment.
Close the cover.
• Close the battery compartment cover
and slide it as shown by the arrow.
~
When the cover clicks
in
place, it will
be locked.
Recycling Time and Flash Count (with size-AA alkaline batteries)
"
on
new
• Quickflash enables a flash to be fired before flash-ready
(p.1
0).
--
• Using size-AA batteries otherthan the alkaline type may cause improper
battery contact due to the irregular shape
of
the battery contacts.
• Ifyou change the batteries after firing many flashes continuously, be
aware that the batteries might be hot.
[i]
Use a new set offour batteries
of
the same brand. When replacing the
batteries, replace all four at one time.
Size-AA Ni-MH or lithium batteries can also be used.
8