Filter
Top Products
210 Additional Information
Cannot save photos on my computer
- When the memory contains too many photos (Windows – 2,500 photos or more, Macintosh –
1,000 photos or more), you may not be able to transfer photos to a computer. Try using a card
reader to transfer the photos on the memory card. -/, only: To transfer the pho-
tos in the built-in memory, copy them to the memory card in advance (A 143).
-/, Wi-Fi Functions
Refer also to the instruction manual of your wireless router and other
devices you will use.
Wireless playback on a DLNA-compatible device is not smooth.
- Playback may not be smooth depending on the wireless router's settings and capability.
- In the [Wi-Fi] menu, set [w] to [On] (A 179) to play back the movie in standard definition.
- Remove any objects between the camcorder and wireless access point that may interfere
with the wireless signal.
- Move the camcorder closer to the wireless access point.
- Turn off the wireless functions of other wireless devices other than the DLNA-compatible
device being used for playback.
- If these do not solve the issue, the cause may be due the device or conditions unique to the
surrounding area. Use the supplied HDMI cable to connect the camcorder to the device.
Cannot play back a movie on a DLNA-compatible device in AVCHD.
- Some DLNA-compatible devices may play back movies in standard definition.
- In the [Wi-Fi] menu, set [w] to [Off] (A 179).
- Remove any objects between the camcorder and wireless access point that may interfere
with the wireless signal.
- Move the camcorder closer to the wireless access point.
- Turn off the wireless functions of other wireless devices other than the DLNA-compatible
device being used for playback.
- If these do not solve the issue, the cause may be due the device or conditions unique to the
surrounding area. Use the supplied HDMI cable to connect the camcorder to the device.
The wireless connection was interrupted while transferring files.
- Incomplete files may remain at the transfer destination. If incomplete files remain at the
transfer destination, check the content and make sure they are safe to delete before deleting
them.
- Select [New Files] and perform the file transfer again.
COPY