Filter
Top Products
ENG-7
The image stabilizer function can be used in both and focus modes.
6. Image Stabilizer Settings
Select the stabilizer mode.
• Select MODE 1 for standard
photography. MODE 1 corrects
all vibrations no matter
whether the camera is being
held horizontally, vertically, or
at an angle.
•To pan a moving subject,
select MODE 2.
MODE 2 corrects vibrations
and shaking only in the
direction at right angles to the
camera’s panning movement.
Press the shutter button
down halfway to check the
stabilization.
• Make sure the image in the
viewfinder is stable, then press
the shutter button all the way
down to take pictures.
Set the STABILIZER switch
to .
• If you are not going to use the
image stabilizer function, set
the switch to .