Filter
Top Products
84
The four-digit file number is like the frame
number on a roll of film. The captured images
are assigned a sequential file number from
0001 to 9999 and saved in one folder. You can
change how the file number is assigned.
1
Select [File numbering].
Under the [5] tab, select [File
numbering], then press <0>.
2
Select the file numbering method.
Turn the <5> dial to select the
desired method, then press <0>.
Continues the file numbering sequence even after the card is
replaced or a new folder is created.
Even after you replace the card or create a new folder, the file
numbering continues in sequence up to 9999. This is convenient when
you want to save the images numbered anywhere between 0001 to
9999 in multiple cards or folders into one folder in your personal
computer.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images might
continue from the file numbering of the existing images in the card or
folder. If you want to use continuous file numbering, you should use a
newly-formatted card each time.
3 File Numbering Methods
(Ex.) IMG_0001.JPG
Continuous
0051
Card-1
0052
Card-2
File numbering after
replacing the card
Next sequential file number
100
0051
101
0052
Card-1
File numbering after
creating a folder
COPY