Filter
Top Products
129
Playing Back MXF Clips
• Playback will start from the clip selected and continue until the end of the last clip in the index screen. When
the last frame of the last clip is reached, playback will be paused.
• Press the Ò button again or press SET to pause/resume the playback.
• Press the Ñ button to stop the playback and return to the index screen.
IMPORTANT
• Observe the following precautions while the CF2 or CF3 access indicator is illuminated in red. Failure to do
so may result in permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not open the cover of the CF card slot being accessed.
NOTES
• You may notice brief stops in video or audio playback between clips.
Onscreen Displays
1
Appears when [£ LCD/VF Setup] > [Metadata Display] > [Camera Data] is set to [On].
2
Appears when [£ LCD/VF Setup] > [Metadata Display] > [Date/Time] is set to [On].
3
When playing back clips that were recorded using slow & fast motion mode, the shooting frame rate and playback frame rate will
both be displayed.
7 8 910
14
11
12
18
19
20
1
2
4
5
6
13
16
15
3
17
1 Remaining battery time (A 58)
2 Joystick guide (A 130)
3 Shutter speed
1
(A 68)
4 2 Aperture value
1
(A 74)
5 ISO speed/Gain
1
(A 71)
6 Recording date and time
2
7 Playback operation
8 Selected CF card
9 Relay recording
10 $ mark/% mark (A 103, 134)
11 Time code (A 84)
12 Clip number / Total number of clips
13 Bit rate (A 66)/Recording mode (A 62)
14 Resolution (A 63, 66)
15 Frame rate (A 62)
3
16 Embedded custom picture file (A 114)
17 Output displays (A 149)
18 User bit (A 87)
19 Audio output channel (A 96)
20 Audio level meter
COPY