126
E
Additional
Information
• The video heads need cleaning
( 121).
• The video heads need cleaning
( 121).
• The TV/VIDEO selector on the TV
isn’t set to VIDEO ( 28).
• The speaker has been turned off with
the SELECT dial ( 27).
• Headphones are being used.
? The playback picture is rough
(with mosaic-like noise).
? There’s no picture on the TV
screen, even though the tape is
moving.
? There’s no sound coming from the
speaker during playback.
MultiMediaCard operations ELURA2 MC only
Cause and/or what to do about it
• It is not turned the right way ( 94).
Turn it the right way and try inserting
again.
• Turn the camera’s power off and
back on again and remove and
reinsert the card if necessary.
• The POWER dial is not set to CARD
REC or CARD PLAY ( 97, 101).
• The MultiMediaCard is not inserted
( 94).
• The MultiMediaCard is full. Erase
images ( 104) or insert a new
MultiMediaCard.
• The power source is not properly
connected ( 11), or the battery
pack is exhausted or not properly
attached ( 12).
• The function can not be used in that
recording program ( 53).
Problem
? The MultiMediaCard will not
insert.
? The mark flashes red in the
display even though a
MultiMediaCard has been
inserted.
? Nothing happens when I press the
buttons.
6_ELURA2_E(116-146) 7/25/00 17:33 Page 126