Filter
Top Products
20
E
Mastering
the Basics
40× digital zoom
Magnifies the camera’s zoom range by up to 4×.
The zoom control continues to work as usual. You can freely zoom in and out
between 1× and 40× magnification — the camera automatically switches between
optical zooming (up to 10×) and digital zooming (10× to 40×). A zoom bar shows
up in the display. The digital zoom area is in blue.
Zooming
The camera’s 10× zoom lens allows you to choose the best picture angle for each
scene:
• Move the zoom control towards W to zoom out to wide-angle.
• Move it towards T to zoom in to telephoto.
You can also control the speed of zooming:
• Move the control slightly to zoom slowly.
• Move it farther to zoom more quickly. (The farther you move the zoom control,
the faster the zoom speed.)
The T and W buttons on the wireless controller adjust the picture angle, but not
the zoom speed.
10× optical zoom
TW
Zoom out
Zoom in
To turn the digital zoom off, open the menu and select CAM.SET UP. Then
select D.ZOOM, set it to OFF and close the menu.
• When zooming, as a rule, keep at least 3 ft 3
3
/8 in (1 m) between you and your
subject. However when the zoom is at the wide-angle position, you can focus
on a subject as close as
3
/8 in (1 cm).
• Image resolution is slightly lower when the magnification is greater than 10
×.
• You cannot use digital zoom when the multi-image screen is set. The display
becomes “– – –”.
D.ZOOM••••••ON
CAM.SET UP
( 34)
MOVIE
P.SCAN
CARD
REC
2_ELURA2_E(08-32) 7/25/00 17:03 Page 20