Filter
Top Products
3-2
CHAPTER 3. REPAIR INSTRUCTION
CAUTIONS:
1. For the connectors of Type C and Type D, set them to the unlocked
state before removing and inserting flexible card. After flexible card
is inserted, set them to the locked state.
2. The flexible card is equipped with the holes as shown. Use them for
removal and insertion by inserting the tweezers into them as required.
1.3 Flexible Connectors
This product uses the four types of the flexible connectors.
Fig. 3-3 Holes for removal
Fig. 3-2 Flexible connectors
The contact-piece
should face
upwards
4 Type D
3 Type C
Unconnected state Connected state
Unconnected state Connected state
Unlocked state Locked state
Unlocked state Locked state
Holes
1 Type A
2 Type B
LOCK
UNLOCK
UNLOCK
LOCK
The contact-piece
should face
downwards