Filter
Top Products
63
a: Wireless Multiple Flash Shooting with Flash Ratio
3
Set flash exposure compensation
as required.
Press function button 3 <F>,
turn <9> and select <6>.
Press function button 3 <B>.
Turn <9> to set the flash exposure
compensation amount, and press the
<8> button.
Press function button 4 <?> to
return to the shooting-ready state.
If you need more flash output or wish to
perform more sophisticated lighting, you
can increase the number of slave units.
Simply set an additional slave unit to the
firing group (A, B or C) whose flash
output you want to increase. You can
increase the number of slave units up to
15 units in total.
For example, if you set a firing group with three slave units to <4>,
the three units are treated and controlled as a single firing group A with
a large flash output.
Slave Group Control
Gr = A Gr = AGr = A
Firing group A
To fire the three firing groups A, B and C at the same time, set
<^>. With the <%> setting, firing group C does
not fire.
If you shoot with firing group C pointing directly toward the main subject,
overexposure may result.
The flash ratio of 8:1 to 1:1 to 1:8 is equivalent to 3:1 to 1:1 to 1:3 (1/2-
stop increments) when converted to number of stops.
The details of the flash ratio set ings are as follows.