Filter
Top Products
32
Turning On the Printer
Refer to the above figure during the following procedure (the numbers in the
figure correspond to the steps in the procedure).
1
Place the printer on a flat surface.
When printing, the paper temporarily projects out from the rear, so allow a clear
space of at least 10 cm (4 inches) at the back.
2
Connect the supplied power cord to the CA-CP100 Compact Power
Adapter (also supplied).
3
Plug the power cord into a power outlet.
4
Connect the Compact Power Adapter cable to the printer.
At this point the CP-200 is ON, so the printer’s indicator lights green.
5
Press the ON/OFF button (only on the CP-300).
When the printer is turned on, the printer’s indicator lights green.
To Turn the Printer Off
• With CP-300: Press the ON/OFF button, releasing it when the indicator
turns off.
• With CP-200: Unplug the Compact Power Adapter from the printer (the
indicator turns off).
• When making connections, confirm that the shape of the plug matches
the shape of the socket on the device being connected.
• The power outlet where the printer’s power plug is connected should be
located where the plug can be easily removed if a problem occurs.
1
2
3
4
5
Compact
Power Adapter
To Power Outlet
At least 10 cm (4 inches)
of open space