Filter
Top Products
2 Safety
9
Safety Precautions
To prevent injuries and data loss, operate the CR-2 correctly by following the safety precautions.
WARNING
Prohibited
Do not damage the power cord
•Do not place anything heavy onto the power cord.
•Do not damage or modify the power cord.
•Do not forcibly bend, twist or pull the power cord.
•Do not hold the power cord when removing it from the AC outlet. Be sure to hold
the plug.
•Do not use an extension cable with the power cord. Connect it directly to the AC
outlet.
Handle the power cord carefully. If the cord is damaged, contact a Canon
representative or distributor for a replacement. Damaged cord may result in fire or
electric shock.
Prohibited
Do not disassemble or modify
Disassembled or modified instrument may result in fire or electric shock. Since the
CR-2 incorporates high-voltage parts that may cause electric shocks, touching
them may cause death or serious injury.
Prohibited
Do not leave alcohol, thinner, or any flammable chemicals
near the instrument.
Do not place near to a flammable solvent. Fire may result if the solvent spills or
evaporates and makes contact with internal electric parts. Some disinfectants are
flammable. Be sure to take care when using them.
Stop using immediately if there is an abnormality or problem
If an abnormality occurs, immediately unplug the power plug
and turn off the power of all the devices
•Smoke is emitted
•An unusual smell
•An unusual noise
•Foreign matter gets inside
•Damaged
Fire or electric shock may result if you keep using in such condition. Immediately
turn off the power of CR-2, unplug the power plug and turn off the power of all
connected devices. Then, contact a Canon representative or distributor.
Prohibited
Do not place anything on top
Fire or electric shock may result if water or any other liquid or a needle, paper clip or
any foreign matter gets inside the CR-2.
Prohibited
Do not use a power supply voltage other than that specified
on the rating label
Do not use any power cord other than the supplied
Use the power voltage specified on the rating label. Otherwise, fire or electric shock
may result.
The supplied power cord is designed exclusively for this product. Do not use any
other power cord.