Canon D60 Digital Camera User Manual


 
13
Introduction
Quick Guide
Turn on the camera.
Turn the main switch to <ON>.
(29)
7
Set the Mode Dial to < >
(Full Auto).
(38)
8
Check the image.
The image is displayed for
approximately 2 seconds after
the shot. (40)
11
To check other images you have
taken, see “Check the Image
Immediately” (40) and “Viewing
Recorded Images” (98).
To erase images you have taken,
see “Erasing a Recorded Image
(Single Image Erase)” (43).
Mount the lens.
Align the red dots on the lens and
camera and turn the lens in the
direction shown by the arrow in the
diagram until it clicks into place. (27)
3
Set the focus mode
switch on the lens to AF.
(27)
4