Filter
Top Products
You can cut out a portion of a recorded image and save it as a new image file.
Trimming Area
Trimming Area Display
Recorded pixels
after trimming
.....[: Choose [Trimming].
Touch FUNC., then MENU to choose the
F¢]tab, and touch [Trimming].
Choose an image.
Drag across the screen to choose an
image, then touch [OK].
Adjust the trimming area.
A frame will appear around the portion of
the image to be trimmed.
The original image will display in the upper
left and the trimmed image will display in
the lower right.
If you move the zoom lever, touch _), _.
or the image on the lower right of the
screen, you can change the frame size.
If you drag on the image at the upper left or
the image on the lower right, you can move
the frame.
If you touch r_, you can change the frame
orientation.
In an image with detected faces, gray
frames appear around the faces located in
the upper left image. The frames can be
used for trimming. You can switch between
frames by touching [].
Touch [New File].
The [Save new image?] screen will
appear.
Save as a new image and display.
Follow Steps 4 and 5 on p. 145.
146