Filter
Top Products
48
Recording
Adjusting the Exposure Manually
Adjust the exposure when a backlit subject becomes underexposed, or overexposed due
to bright light. Exposure cannot be adjusted in the Fireworks recording program.
Available only in the and modes.
Exposure Lock
1. Set the mode switch to .
2. If the joystick guide does not appear on
screen, press ( ) to display it.
3. Push the joystick ( ) towards [EXP] to enter
the exposure lock mode.
• [EXP] on the joystick guide will be displayed in light
blue and the exposure adjustment indicator and the neutral value “±0” appear on the
screen.
• When you operate the zoom during exposure lock, the brightness of the image may
change.
Exposure Adjustment
During exposure lock:
4. Adjust ( ) the brightness of the image as necessary.
To return to automatic exposure, push the joystick ( ) towards [EXP] once more. The
exposure adjustment indicator will disappear and [EXP] will turn white again.
5. Push the joystick ( ) towards [BACK] to save the exposure setting.
• When you operate the zoom during exposure lock, the brightness of the image may
change.
• The adjustment range depends on the brightness at the time you locked the
exposure.
• The manual exposure setting will reset to auto exposure when you turn the
camcorder off or change the recording program.
Mode switch
Joystick
EXP
BACK