Filter
Top Products
350
You can register your preferred shooting mode, menu settings, Custom
Function settings, and other current camera settings to the <w1>/
<w2>/<w3> Custom shooting modes. To use <w2> or <w3>, set them
in [82: Restrict shooting modes] (p.323).
1
Select [Custom shooting mode
(C1-C3)].
Under the [54] tab, select [Custom
shooting mode (C1-C3)], then press
<0>.
2
Select [Register settings].
Turn the <5> dial to select [Register
settings], then press <0>.
3
Register the Custom shooting mode.
Turn the <5> dial to select the
Custom shooting mode to be
registered, then press <0>.
On the confirmation dialog, select
[OK] and press <0>.
X The current camera settings (p.351)
will be registered under the C*
shooting mode.
If you shoot in the <w1>/<w2>/<w3> mode and change a camera
setting, the Custom shooting mode can be updated automatically to
reflect the changed setting. To enable this automatic update, in step 2,
set [Auto update set.] to [Enable]. The settings which can be
automatically updated are listed on pages 351 and 352.
In step 2, if you select [Clear settings], the respective Custom shooting
mode will revert to the default settings effective before you registered
the camera settings. The procedure is the same as step 3.
w: Registering Custom Shooting Modes
Automatic Updating
Canceling Registered Custom Shooting Modes
COPY