Filter
Top Products
Menu Options
152
[¤ TC/UB Setup] menu ( mode only)
* In the following cases, the time code is set to [NDF] and this setting cannot be changed:
- [w Other Functions] > [24.00P] is set to [On]
- [w Other Functions] > [NTSC/PAL] is set to [PAL]
- [w Other Functions] > [NTSC/PAL] is set to [NTSC] and the frame rate is set to 23.98P
[24P TC/Sync]: Determines the frequency for time code input and output and for Genlock synchronization when
the frame rate is set to 23.98P or 24.00P.
[XF Legacy]: Synchronization mode compatible with Canon XF series camcorders. Synchronizes the time
code at a 30-frame signal and the Genlock signal at a 59.94i or 60.00i signal.
[Normal]: Standard synchronization mode. Synchronizes the time code at a 24-frame signal and the Genlock
signal at a 23.98P or 24.00P signal.
[¤ User Bit Setup] menu ( mode only*)
* Not available in the [Photos] index screen.
[w Other Functions] menu
Menu item Submenu Setting options A
[Time Code] [Mode] [Preset], [Regen.] 73
[Run] [Rec Run], [Free Run] 73
[DF/NDF] * [DF], [NDF] 74
[Setting] [Set], [Reset] 73
[TC In/Out] [In], [Out] 78
[24P TC/Sync] [XF Legacy], [Normal] –
[User Bit] [Rec Mode] [Internal], [External] 78
[Output Mode] [Fixed], [Pulldown] 79
[Type] [Setting], [Time], [Date] 76
Menu item Setting options A
[Output Mode] [Fixed], [Pulldown] 79
Menu item Submenu Setting options A
[Reset] [All Settings] [Cancel], [OK] Ü Ü
–[Camera Settings] [Cancel], [OK] Ü –
[Assignable Buttons] [Cancel], [OK] Ü Ü
1
[Transfer Menu//] [Save To *] [Menu], [Menu+/] Ü Ü
111
[Load From *] [Menu], [Menu+/] Ü Ü
[Time Zone] List of world time zones.
[UTC-05:00 New York] or [UTC+01:00
Central Europe]
2
Ü Ü 27
[Clock Set] [Date/Time] – Ü Ü
27
[Date Format] [YMD], [YMD/24H], [MDY], [MDY/24H],
[DMY], [DMY/24H]
2
Ü Ü
COPY