Canon FS10 Camcorder User Manual


 
Video
46
Manual Exposure Adjustment
1 Press to display the joystick
guide.
If [EXP] does not appear on the
joystick guide, repeatedly push the
joystick ( ) toward [NEXT] to display
it.
2 Push the joystick ( ) toward
[EXP].
The exposure adjustment indicator
and the neutral value [±0]
appear on the screen.
3 Adjust the ( ) the brightness of
the image as required.
The adjustment range and the length
of the exposure adjustment indicator
will vary depending on the initial
brightness of the picture.
4 Press .
The exposure adjustment indicator
will change to white and the
exposure will be locked.
If you operate the zoom lever
during exposure lock, the
brightness of the image may
change.
During exposure lock, press
and push the joystick ( ) toward
[EXP] again to return the
camcorder to automatic exposure.
Manual Focus Adjustment
Autofocus may not work well on the
following subjects. In such case, focus
manually.
Reflective surfaces
Subjects with low contrast or without
vertical lines
Fast moving subjects
Through wet windows
Night scenes
POINTS TO CHECK
Adjust the zoom ( 33) before you
start the procedure.
1 Press to display the joystick
guide.
If [FOCUS] does not appear on the
joystick guide, repeatedly push the
joystick ( ) toward [NEXT] to display
it.
2 Push the joystick ( ) toward
[FOCUS].
[MF] appears.
3 Adjust ( ) the focus as
necessary.
Pushing the joystick ( ) toward
[FOCUS] again will return the
camcorder to autofocus.
4 Press .
The focus will be locked.
( 24)
C OPY