Canon FS10 Camcorder User Manual


 
97
Condensation may form in the following cases:
When the camcorder is moved
quickly from cold to warm places
When the camcorder is left in a humid
room
When a cold room is heated rapidly
Do not expose the camcorder to
sudden or extreme changes in
temperature.
Place the camcorder in an airtight
plastic bag and let it adjust to
temperature changes slowly before
removing it from the bag.
The camcorder automatically shuts off.
The precise time required for water
droplets to evaporate will vary
depending on the location and weather
conditions. As a general rule, wait for 2
hours before resuming use of the
camcorder.
Using the Camcorder Abroad
Power Sources
You can use the compact power
adapter to operate the camcorder and
to charge battery packs in any country
with power supply between 100 and
240 V AC, 50/60 Hz. Consult a Canon
Service Center for information on plug
adapters for overseas use.
Playback on a TV Screen
You can only play back your recordings
on TVs compatible with the NTSC
system. The NTSC system is used in
the following countries/areas:
American Samoa, Antigua, Aruba,
Bahamas, Barbados, Bermuda, Bolivia,
Canada, Chile, Colombia, Costa Rica,
Cuba, Ecuador, El Salvador, Greenland,
Guam, Guatemala, Haiti, Honduras,
Jamaica, Japan, Korea, Mexico,
Micronesia, Myanmar, Nicaragua,
Panama, Peru, Philippines, Puerto Rico,
Saint Kitts and Nevis, Saint Lucia, Saint
Vincent and the Grenadines, Surinam,
Taiwan, Trinidad and Tobago, USA,
Venezuela, Virgin Islands.
TO AVOID CONDENSATION
W
HEN CONDENSATION IS DETECTED
C OPY