Canon HF S20 Camcorder User Manual


 
Additional Information 163
[Auto Rotate]: Photos that were recorded in portrait orientation (by turning
the camcorder on its side), will be rotated automatically and displayed
correctly during playback.
[Photo Review Time]: Selects the time to display a photo after it has been
recorded.
The review time can only be set when the drive mode is set to
[A Single].
[Photo Numbering]: Select the photo numbering method to be used on a
new memory card. Photos are automatically assigned consecutive num-
bers from 0101 to 9900, and stored in folders containing up to 100 pho-
tos. Folders are numbered from 101 to 998.
[a Reset]: Photo numbers will restart from 101-0101 every time you
insert a new memory card.
[b Continuous]: Photo numbers will continue from the number following
that of the last photo recorded with the camcorder.
If the memory card you insert already contains a photo with a larger
number, a new photo will be assigned a number one higher than that of
the last photo on the memory card.
We recommend using the [b Continuous] setting.
The photo number indicates the name and location of the file on the
memory card. For example, the file name of a photo numbered 101-
0107 is “IMG_0107.JPG”, stored under the folder “DCIM\101CANON”.
[USB Connection Type]: Select the connection protocol to use when con-
necting the camcorder to an external device using the supplied USB
cable.
[
M DVD Burner]: To connect exclusively to the optional DW-100 DVD
Burner.
[
N Computer/Printer]: To connect to a computer, printer or similar USB
peripheral.
[V Connect and Set]: To make the selection from a screen that
appears at the time of the connection to the external device.
COPY