Filter
Top Products
150 Additional Information
- After selecting [Scene Search] [Scenes with Faces], no scenes contain people’s faces or
no scenes were recorded using the face detection function.
-
// This message will appear when there are no high-definition scenes
on the memory card. If you converted scenes into standard definition, you can still open the
other index screens to check those scenes ( 44).
Not enough available space
- Delete some recordings on the memory card ( 50, 83) or select the [3 Mbps] bit rate for
the conversion to SD.
Number of scenes already at maximum
- The maximum number of scenes (3,999 scenes) has been reached. Delete some scenes
( 50) to free some space.
Playlist is full. Cannot divide the scene.
- Scenes cannot be divided when the playlist already contains 999 scenes. Delete some scenes
from the playlist ( 73).
Print order error
- You attempted to set more than 998 photos in the print order. Reduce the number of print
orders.
Scene recorded using another device. Cannot divide the scene.
- Scenes recorded using another device cannot be divided with this camcorder.
// Select the built-in memory as the recording media for movies
- You attempted to set relay recording while the memory card is selected as the recording
media for movies. Change [Rec Media for Movies] to [Built-in Mem.].
Some photos could not be deleted
- Protected photos ( ) cannot be deleted. Remove the protection ( 89).
Some scenes could not be added to the playlist
- Scenes that were not recorded with this camcorder cannot be added to the playlist.
- The playlist can contain a maximum of 999 scenes. If the playlist includes scenes recorded in
FXP mode, the maximum number of scenes in the playlist may be less than 999. Delete some
scenes from the playlist ( 73).
Some scenes could not be deleted
- Movies that were protected/edited with other devices cannot be deleted with this camcorder.
// Some scenes were recorded using another device and cannot be
copied.
- Scenes that were not recorded with this camcorder cannot be copied to the memory card.
Task in progress. Do not disconnect the power source.
- The camcorder is updating the memory. Wait until the operation ends and do not disconnect
the compact power adapter or remove the battery pack.