Canon HFR38 Film Camera User Manual


 
112 Video
Capturing Video Snapshot Scenes and Photos from a Movie
You can capture video snapshot scenes or photos from a previously
recorded scene. For example, you may want to print photos from video
recorded at a party or create a small video clip using video snapshot
scenes from the highlights of an event.
Operating modes:
Capturing a Video Snapshot Scene
1 Play back the scene or story from which you want to capture the
video snapshot scene.
2Press Y to capture the video snapshot scene.
The camcorder captures the video snapshot scene for about 4
seconds (the blue frame serves as a visual progress bar), and then
enters playback pause mode. You can change the length of the video
snapshot scenes you capture to 2 or 8 seconds with the r >
[Video Snapshot Length] setting.
3Touch [Ñ] to stop the playback.
NOTES
A video snapshot scene can be captured only during playback; it can-
not be captured during playback pause mode.
The captured video snapshot scene is saved to the same memory that
contains the source scene.
Video snapshot scenes cannot be captured from any of the following
types of scenes.
- Scenes shorter than 1 second
- */)/( Scenes that were edited using the supplied
software VideoBrowser and were then transferred to a memory card
connected to the computer.
When the source scene is itself a video snapshot scene, you may not
be able to capture a video snapshot scene depending on the length of
the source scene and the length currently selected for video snapshot
scenes.
COPY