Canon HFR38 Film Camera User Manual


 
Additional Information 189
When playing back scenes/slideshow with background music, the music track is not played
back correctly.
- This can occur when you transfer the music files to a memory card after repeatedly recording
and deleting scenes (fragmented memory). Save your recordings (A129) and initialize the
memory card (A 41). Then, transfer the music files first and only then transfer the video
files.
- Music tracks will not play back correctly if the connection was interrupted while transferring
the music files to a memory card. Delete the music tracks and transfer the music files again.
- The transfer rate of the memory card used is too slow. Use a recommended memory card
(A 36).
Cannot divide scenes
- You cannot divide scenes recorded or edited using another device and then transferred to a
memory card connected to the computer. Also, you cannot divide scenes that are from movies
converted to standard definition (*/)/( only) or MP4 movies.
- The memory is full. Delete some recordings (A 60,118) to free some space.
Cannot mark individual scenes/photos in the index screen with a checkmark !
- You cannot select more than 100 scenes/photos individually. Select the [All Scenes] or [All
Photos] option instead of [Select].
Indicators and Onscreen Displays
After ê lights up in yellow and you turn off the camcorder, it cannot be turned on again.
- The battery charge has become low or the battery pack is exhausted. Replace or charge the
battery pack.
lights up in red.
- Battery pack is exhausted. Replace or charge the battery pack.
appears on the screen.
- The camcorder cannot communicate with the optional battery pack attached so the remaining
battery charge cannot be displayed.
* lights up in red.
- A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory
card. Initialize the memory card if the display does not change back to normal.
- The memory card is full. Replace the memory card or delete some recordings (A60, 118)
to free some space on the memory card.
Even after stopping recording, the ACCESS indicator does not go off.
- The scene is being recorded in the memory. This is not a malfunction.
COPY