Filter
Top Products
111
If you set the mode switch to 4, and the mode to G, you can change the
settings in the 4 tab (p. 46).
Turning off the AF Assist Beam
If the camera cannot focus in low light conditions when you press the shutter
button halfway, the lamp will automatically light to assist focusing. You can
turn off the lamp.
● Select [AF-assist Beam], then press the
qr buttons to select [Off].
Turning off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
● Select [Flash Settings], then press the m
button.
● Press the
op
buttons to select [Red-Eye
Lamp], then press the qr buttons to
select [Off].
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 124 – 125).
Changing Shooting Functions