Filter
Top Products
Changing Shooting Functions
112
Changing the Image Display Time
You can change the length of time the images display directly after shooting.
● Select [Review], then press the qr
buttons to select an option.
● If you select [Off], the image will not
display.
● If you select [Hold], the image displays
until you press the shutter button halfway.
Changing the Image Display Right After Shooting
You can change the image display that appears after shooting.
● Select [Review Info], then press the qr
buttons to select an option.
Displaying the Overlay
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for L size or postcard size prints.
● [Disp. Overlay], then press the qr
buttons to select an option.
Detailed Displays detailed information (p. 43).
Focus
Check
The area inside the AF frame is
magnified, allowing you to check the
focus. The procedure is the same as
in “Checking the Focus” (p. 93).
Grid Lines A grid overlays the display.
3:2 Guide
The areas outside the 3:2 range are
grayed out. This area will not print
when printing on paper with a 3:2
aspect ratio.
Both
Both grid lines, and the 3:2 guide
will display.