Filter
Top Products
Playback
24
Locating the End of the Last Scene
After playing back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point.
POINTS TO CHECK
Stop the playback before using this
function.
1 Press .
2 Select ( ) [ END SEARCH] and
press ( ).
3 Select ( ) [EXECUTE] and press
().
• “END SEARCH” appears.
• The camcorder rewinds/fast forwards
the tape, plays back the last few
seconds of the recording and stops the
tape.
• To cancel the search push the
joystick ( ) towards .
NOTES
End search cannot be used once you remove
the cassette.
If there are blank sections between
recordings, the end search may not work
correctly.
Magnifying the Playback Image
During playback, movies and still images
can be magnified up to 5 times. You can
also select the area to be magnified.
1 Move the zoom lever toward T.
• The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
• To further enlarge the image, move
the zoom lever toward T. To reduce the
magnification, move the zoom lever
toward W.
• will appear for images that cannot
be enlarged.
2 Select ( , ) the enlarged area
of the picture with the joystick.
To cancel the magnification, move the
zoom lever toward W until the frame
disappears.
IMPORTANT
While the magnification position frame is
displayed, it will replace the joystick guide. Cancel
the magnification to return to normal playback.
FUNC.
(17)
FUNC.
(7)