Filter
Top Products
Menu Options Lists
Advanced Functions
27
VCR S etup (Recording Mode, TV Type, etc.)
VCR SETUP
[STD PLAY], [ LONG PLAY]
Recording in LP mode extends the
available recording time on the tape 1.5
times.
Depending on the condition of the tape
(long usage, imperfections, etc.) you may
notice some video problems (blocky video
artifacts, banding, etc.) in the playback
picture when playing back recordings
made in LP mode. We recommend using
the SP mode for important recordings.
If you make recordings in both SP and
LP modes on the same tape, during
playback you may notice some video
problems in the picture at the point where
the recording mode changes.
When playing back in this camcorder
tapes recorded in LP mode with other
devices or vice versa, you may notice
some problems in the playback picture or
the sound may stop briefly.
[ NORMAL TV],
[ WIDE TV]
In order to display the picture in full and in
the correct aspect ratio, select the setting
according to the type of television to
which you will connect the camcorder.
[NORMAL TV]: TV sets with 4:3 aspect
ratio.
[WIDE TV]: TV sets with 16:9 aspect
ratio.
Audio S etup (Audio Mo de, Wind Scr een, etc.)
AUDIO SETUP
[ L/R], [ L/L], [ R/R]
Mode switch:
[ AUTO], [ OFF ]
The camcorder automatically reduces the
background sound of wind when
recording outdoors.
The wind screen cannot be turned off
when the mode switch is set to .
[ STEREO1], [ STEREO2],
[ MIX/FIXED], [ MIX/VAR.]
When [12bit AUDIO] is set to [ MIX/
VAR.], adjust ( ) the sound balance
with the joystick.
The camcorder will retain the audio
balance adjustment, however if you turn
off the camcorder, [12bit AUDIO] will be
reset to [ STEREO1].
[ 16bit], [ 12bit]
REC MODE
TV TYPE
OUTPUT CH
(36)
WIND SCREEN
12bit AUDIO
(36)
MIX BALANCE
(36)
AUDIO MODE