Filter
Top Products
57
[BRIGHTNESS]: Adjust ( ) the brightness of the LCD display with the joystick.
• Changing the brightness of the LCD display does not affect that of the viewfinder or the
recordings.
[TV SCREEN]: When set to [ ON], the camcorder’s on-screen displays will appear also
on the screen of a connected TV or monitor.
When the date and time are displayed on the camcorder’s screen they will also appear on
a connected TV regardless of the [TV SCREEN] setting. Turn off the date/time display with
the [DATA CODE] setting ( 34).
[MARKERS]: You can display a grid or a horizontal line at the center of the screen. Use the
markers as a reference to make sure your subject is framed correctly (vertically and/or
horizontally).
• Using the markers will not affect the recordings on the tape.
[DISPLAYS]: You can hide the on-screen displays to show only the playback picture on the
full screen.
• Tape operation displays appear for 2 seconds.
• Warning messages and the data code (if activated) will appear, even when set to
[ OFF<PLAYBK>].
• All on-screen displays will appear while the playback image is magnified or a digital
effect is activated.
[6SEC.DATE]: When you start playing back a tape or when the date of the recording
changes, the date and time will be displayed for 6 seconds.
[DEMO MODE]: The demonstration mode displays the camcorder’s main features. It starts
automatically when the camcorder is powered with the power adapter if you leave it turned
on without loading a recording media for more than 5 minutes.
• To cancel the demo mode once it started, press any button, turn off the camcorder or
insert a videocassette.
System Setup (Beep, Power Save, etc.)
SYSTEM SETUP
[WL. REMOTE]: Allows the camcorder to be operated with the wireless controller.
[BEEP]: A beep will accompany some operations like turning on the camcorder, the self-
timer countdown, etc. It also serves as a warning beep under unusual conditions.
Menu item Setting options
CAMERA PLAY
[WL.REMOTE] [ON], [ OFF ] zz–
[BEEP] [ HIGH VOLUME],
[ LOW VOLUME], [ OFF]
zz–
[POWER SAVE] [ON], [ OFF] z ––
COPY