Filter
Top Products
98
E
Editing
Do not connect/disconnect any cables to/from the camcorder when dubbing
audio or preparing to dub audio.
1. Locate the point where you want to start audio dubbing, then
press the PAUSE button.
• You can use the playback buttons on the body of the camcorder or the
special playback functions on the wireless controller in the same way as
in playback mode.
• The camcorder becomes set to playback pause mode.
2. Press the AUDIO DUB. button.
• AUDIO DUB. and appear on the display.
3. Press the PAUSE button.
• Audio dubbing starts.
• Direct your voice into the microphone.
• changes to .
4. When you get to the point where you want to stop dubbing,
press the STOP button.
• Audio dubbing stops and AUDIO DUB. disappears from the display.
• The camcorder returns to stop mode.
• You can also set the zero set memory ( 84) at the place you want to
stop audio dubbing, then every time you return to that position, audio
dubbing will stop.
• If instead of pressing STOP you press PAUSE, the camcorder will
return to the playback pause mode.
REW
PLAY
FF
REMOTE SET
SEARCH
SELECT
ZERO SET
MEMORY
AUDIO
DUB.
STOP
AV
INSERT
PAUSE
SLOW
+ /
– /
×2
Dubbing
#4_MV5/MV5i/MV5i MC_E(85-105) 02.4.17 7:16 PM Page 98