Filter
Top Products
24 Preparing the Camera
Setting the Date / Time
The Set Date/Time menu will appear the first time the camera power is turned on
or whenever the built-in rechargeable lithium battery charge is low. Start from Step
5 to set the date and time.
1
Turn on the camera (p. 27).
2
Press the button.
• The [ (Rec.)] or [ (Play)] menu appears.
3
Select the [ (Set up)] menu using A on
the multicontroller.
• Pressing the button also switches
between menus.
4
Select [Date/Time] using C or D on the
multicontroller, then press .
• The factory default for the date format may differ from that shown here in
some regions.
5
Set the date and time.
• Select the item using B or A on the multicontroller.
• Set the values using C or D on the multicontroller.
• The date can be set up to the year 2030.
6
Press .
• After adjusting the settings, press the button to close the menu window.
• You may need to reset the date and time if the battery pack is removed for about
three weeks.
(Rec.) Menu.