Filter
Top Products
Shooting - Selecting Particular Effects 77
Auto Exposure Bracketing (AEB Mode)
In this mode, the camera automatically changes the exposure within a set range to take
three shots after you press the shutter button once. You can adjust AEB settings in 1/3EV
steps within the range of -2EV to +2EV of the standard exposure setting. AEB settings can
be combined with exposure compensation settings (p. 73) to extend the adjustment
range. The images are shot in the following order: Standard exposure,
underexposure and overexposure.
1
Press the button three
times.
• The icon and the exposure compensation bar
appear on the LCD monitor.
2
Expand or contract the range using B or
A on the multicontroller.
• Use A to expand the range and B to contract it.
3
Press .
• You can also take the picture with the set exposure compensation value by
pressing the shutter button without pressing
.
• To cancel the AEB setting, return the setting to
using B or A on the
multicontroller.
4
Shoot the image.
• If you pressed the shutter button at Step 3, the icon and the exposure
compensation bar will reappear after the shot, allowing you to change the
setting for the next shot.
• The AEB mode cannot be used for flash photography. If the flash fires, only one
image gets recorded.
• The macro mode cannot be set while the exposure compensation bar appears on
the LCD monitor.
• This function can only be selected in the , and shooting modes.
• The selected shooting mode will determine whether or not the AEB setting is
cancelled when the camera is turned off.