Filter
Top Products
138
Image is blurred or
out of focus
The subject is hard
to focus on
• Use the focus lock or AF lock to
shoot.
See
Shooting Hard-to-Focus Subjects
(Focus Lock, AF Lock)
(p. 72).
Subject in recorded
image is too dark
Insufficient light for
shooting
• Set the flash to on.
Subject is dark in
contrast to the
background
• Set the exposure compensation
to a positive (+) setting or use the
spot metering function.
Subject is too far
away for flash to
reach
• Shoot within
3.5
m (
11
ft.) of the
subject at the maximum wide
angle or 2.0 m (6.6 ft.) of the
subject at the telephoto end
setting using the flash.
• Raise the ISO sensitivity and then
shoot. See Adjusting the ISO
Speed (p. 85).
Subject in recorded
image is too bright
Subject is too close,
making the flash too
strong
• When using the flash, stay at
least
46
cm (
1.5
ft.) from the
subject.
Subject is bright in
contrast to the
background
• Set the exposure compensation
to a negative (-) setting or use the
spot metering function.
Light is shining
directly on the
subject or reflected
off the subject into
the camera
• Change the shooting angle.
Flash is set to on • Set the flash to off.
A bar of light (red,
purple) appears on
the LCD monitor
Subject is too bright • This is a normal occurrence in
devices containing CCDs and
does not constitute a
malfunction. (This bar of light will
not be recorded when shooting
still photos, but it will be recorded
when shooting movies.)
Problem Cause Solution