Filter
Top Products
139
Troubleshooting
White dots appear
on the image
Light from the flash
has reflected off
dust particles or
insects in the air.
(This is especially
noticeable when
shooting at wide
angle)
• This is a phenomenon that occurs
with digital cameras and does not
constitute a malfunction.
Flash does not fire Flash is set to off • Set the flash to on.
Image not showing
on TV monitor
Incorrect video
system setting
• Set the video system to the
appropriate setting, NTSC or PAL,
for your TV (p. 50).
Shooting in stitch
assist
• The output will not appear on a
TV in stitch assist. Cancel the
stitch assist.
Zoom does not work Zoom lever pressed
during movie
recording
• Adjust the zoom before shooting
a movie.
Reading images
from CF card is slow
CF card was
formatted in another
device
•
Use a
CF
card formatted in your
camera.
See Formatting CF Cards (p.
107).
Recording images to
CF card takes a long
time
Problem Cause Solution