Filter
Top Products
19
Before Using the Camera - Basic Operations
*1 Displays when the shutter button is pressed halfway.
*2 This is not normally displayed. It appears when remaining available
internal memory (buffer) is half or less during movie recording (when the
buffer warning indicates full, shooting or recording may be stopped).
*3 “0” appears in red when no more recording space is available for either
still images at the current number of recordable images, or movies.
When both recording capacities are full, the “Memory card full” message
appears.
The “Raise the flash” message, (camera shake warning),
or (flash warning) icon blinks red on the LCD monitor (or
viewfinder) in low light conditions while the camera is
preparing to shoot. Use one of the following shooting
methods.
- Set the IS mode to any setting other than [Off] (p. 30)
- Raise the ISO speed (p. 80)
- Set the Auto ISO Shift to [On] (p. 81)
- Raise the flash to enable automatic or normal firing
- Fix the camera to a tripod
Drive Mode (p. 46, Basic Guide p. 18)
ISO Speed (p. 80)
zRec Movie Recording (p. 50)
Auto Rotate (p. 99)
Flash (
Basic Guide
p. 14)
Spot AE Point Frame (p. 78)
AF Frame (p. 69)
Low Battery (p. 159)
Macro/Super Macro (Basic Guide p. 16)
Shooting Mode
(Basic Guide p. 11-13) (p. 57) (p. 50)
Save Settings (p. 96)
(Red) Flash Warning (p. 19)