Filter
Top Products
107
Shooting
• The default setting for color swap mode changes green into white.
• You may not obtain the expected results after color input mode if you
use the flash, or change the white balance or metering settings.
• The colors specified in the color swap mode are retained even if the
camera's power is turned off.
4
Aim the camera so that the desired
color appears at the center of the
LCD monitor and press the
button.
• Only one color can be specified.
• You can shoot immediately after this step.
The screen will reappear after the shot
allowing you to change the settings and
shoot again.
5
Press the MENU button.
The color input mode will no longer be in
effect.
6
Press the FUNC./SET button.
The display will return to the shooting
screen.