Filter
Top Products
193
* Default setting
Setting available
U
Setting can only be selected for the first image.
(Shaded Area): Setting is memorized even when the camera power is shut off.
With the exception of the [Date/Time], [Language] and [Video System] settings, all the
other menu settings and changes made with the camera buttons can be reset to the default
values in a single operation (p. 59).
(1) (2)
The resolutions and frame rates for the (Movie) mode are as follows.
(3)
The default flash setting is Auto with Red-Eye Reduction in the modes,
Auto in the mode.
-
When the flash fires in mode, the camera will automatically use Slow Synchro mode.
(4)
You cannot switch between the Macro/Infinity modes when the camera is in the mode.
(5) AF cannot be selected in the mode.
(6) Can be set during shooting (only in Standard mode).
(7) Exposure compensation not available in or modes.
(8) This cannot be set when the Photo Effect is set to Sepia or B/W.
(9) Automatically set by the camera.
(10)The Photo Effect cannot be set in the mode.
Metering
Method
Evaluative – * *– *– –
p. 94
Center-Weighted Average
– – ––
Spot – – ––
Exposure Compensation
–
(7)
U
(7)
p. 95
Long Shutter
– – – – – – p. 95
White Balance
(8)
– –
(9)
U p. 98
Photo Effect
– –
(9)
– U
(10)
p. 101
ISO Speed
–
(9)
–
(9)
–
(9)
–
(9)
–
(9)
p. 109
Auto Rotate
U – p. 110
Resolution
640 x 480 pixels
*– –
320 x 240 pixels
–
160 x 120 pixels
––
Frame Rate
60 frames/sec.
– –
30 frames/sec.
*– –
15 frames/sec.
–
Function
Page