Filter
Top Products
Viewing Images on a TV set
103
Viewing Images on a TV set
You can shoot or play back images on a television with the supplied
AV cable.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 27). The default
setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may
not display properly.
1
Turn off the Camera and the TV.
2
Connect the AV cable to the camera’s A/V
OUT terminal.
zSlip a fingernail under the top edge
of the camera's DIGITAL terminal
cover, lift up and plug the AV cable
in all the way.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
4
Turn on the TV and switch it to video mode.
5
Turn on the camera.
VIDEO
AUDIO
Yellow
Black