Filter
Top Products
Shooting
67
You can check whether the image is in focus right after it is recorded.
To cancel: press the shutter button halfway.
z You can delete an image by pressing the button while
the image is displayed, except in the display position
change mode (See Basic Guide, p.19).
z Pressing the DISP. button will change the display on the
LCD monitor as follows.
Focus Confirmation Î Detailed Î No Information
Checking for Focus Right After Shooting
Shooting Mode
1
Shoot.
zThe recorded image displays for about 2 seconds (or the
interval set with the Review function p.24).
2
Press (or ) while the
image is displayed.
zThe number of times the DISP. but-
ton is pressed depends upon the
display settings for the LCD monitor
(See below). Press the DISP. button
repeatedly until the screen at the
right appears.
zDisplays as follows.
- Camera is focused: AF frame for the image that has been
shot displays in white, and an orange frame appears
within the focused frame.
- Camera is not focused: Image that has been shot displays,
and an orange frame displays at the center of the image.
- Contents of the orange frame can be confirmed at the bot-
tom right.
- Zoom can also be used (p. 73).
zYou can switch between AF frames and change the display
position (p. 68) using the MENU button or the FUNC./SET
button.
Recorded Image
Orange frame contents