Canon PowerShot SX50 HS Film Camera User Manual


 
4
Initial Preparations
Inserting the Battery and Memory Card
1 Open the cover.
Slide the cover ( ) and open it ( ).
Terminals
2 Insert the battery.
While pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
To remove the battery, press the battery
lock in the direction of the arrow.
Label
3 Check the card’s write-protect
tab and insert the memory card.
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked (downward) position.
Slide the tab up until it clicks into the
unlocked position.
Insert the memory card facing as shown
until it clicks into the locked position.
To remove the memory card, push it in
until you feel a click, and then slowly
release it.
4 Close the cover.
Lower the cover in the direction of the
arrow and press it until it clicks into the
closed position.
EC334_GS_EN.indd 4EC334_GS_EN.indd 4 24/07/2012 13:40:2324/07/2012 13:40:23