Canon RE-450X Camcorder User Manual


 
9
Storing
Put the lens cap to the lens.
Direct the camera head sideways until it stops.
Hold the arm with your right hand and press
the arm lock release lever, then pull the arm
down to the document table very carefully.
Fold the pair of illumination lamps very carefully.
Fold the left-hand illumination lamp first (
), then the right-
hand illumination lamp (
).
1
2
3
4
Be sure to turn the power OFF before storing the unit.
Put the supplied unit cover on the RE-450X when the unit is not in use. The unit
cover has a pocket to store cords.
Place the unit horizontally when storing it. If the unit is stored
vertically, it may fall down and cause injury or malfunction. When
carrying the unit, turn the power OFF, disconnect the cords, fold the
arm and the illumination lamps, and pull out the carrying handle.
Do not touch the fluorescent lamps after the
illumination lamps are turned off, as they may still
be hot.
CAUTION
Make sure to hold the arm when stowing it. If the arm is
stowed without being held, the arm jumps up and may result
in injury or malfunction. Please stow it slowly.
Arm lock release lever
NOTICE
NOTICE
CAUTION