Filter
Top Products
14
E
LOW HIGH
E
WHITE
PAPER
EXPOSURE
HARD
NE
AUTO
SOFT
DETAIL
FO
To adjust brightness, turn the EXPOSURE knob. Turn the knob
toward the HIGH side to brighten the image. Turn the knob toward
the LOW side to darken the image.
Use the DETAIL control to adjust picture quality. Turn the control
toward the HARD side to emphasize the outline of an object. Turn
the control towards the SOFT side for a softer outline.
The brightness of the picture can be controlled by the EXPOSURE control. When the document is dark, has
low cotrast, or is small and dim against a brighter background, use the EXPOSURE control to make the
image clearer.
Adjusting Brightness and Picture Contrast
Operation panel
LOW HIGH
RED BLUE
MANUALAUTO
WHITE
PAPER
POWER
LIGHT
BACK
LIGHT
INPUT
SELECT
WHITE BALANCE
EXPOSURE
WHITE
PAPER
EXPOSURE
To project white documents much whiter, press the WHITE PAPER
button.
If the button is pressed, the WHITE PAPER indicator lights up.
If the button is pressed again, the indicator turns off and returns to
regular mode.
To project white parts of white documents much whiter, press the WHITE PAPER button. If the button is
pressed, the WHITE PAPER indicator lights up. If the button is pressed again, the indicator turns off and
returns to regular mode.
Projecting white documents
Operation panel
Brightness may not be adjusted effectively using the EXPOSURE
knob if the image is too dark.
The effectiveness may vary depending on the document, including how dark it
is.