Filter
Top Products
28
Wireless Remote Control (DATE Model only)
1
Show the < > icon on the LCD
panel.
•
Press the < > button to
display the < > icon.
2
Take the picture.
•
Point the controller toward the
camera’s remote control sensor and
press the transmit button.
•
Display indications
2-sec. delay:The indicator will be the same
as during the last 2 sec. of the self-timer.
No delay:When the picture is taken, the
self-timer/wireless remote control lamp will
flash.
If you set the film advance mode lever to <>and do nothing for four min-
utes, the wireless remote control mode will be canceled automatically to save
battery power.
Certain types of fluorescent lights might cause the remote control operation to work
improperly. Place the camera away from any fluorescent lights as far as possible.
With Remote Controller RC-1 (optional), wireless operation is possible
up to 5 meters away from the front of the camera.
Using the Eyepiece Cover
When you use the self-timer or wireless remote control and your eye does
not cover the eyepiece, stray light entering the eyepiece may affect the
exposure setting.To prevent this, attach the eyepiece cover to the eyepiece.
1
Remove the eyecup from the
eyepiece.
2
Slip on the Eyepiece cover (→page
13) over the eyepiece.
Remote control
sensor
NNN E SEC2 (21-30) 02.5.11 11:15 AM Page 28