Filter
Top Products
48
Multiple Exposures
If you shoot multiple exposures on the first few or last few frames of a roll, the
multiple exposures might not be precisely aligned due to the film curling.
• During multiple-exposure shooting, the < > arrow next to the < > icon on the
LCD panel will blink.
• To cancel multiple exposures before shooting, set the number of multiple exposures
to 1.
• To cancel multiple exposures after shooting, follow steps 1 and 2 to set the num-
ber of multiple exposures to blank.
By not advancing the film after taking a picture, up to nine exposures
can be shot on a single frame.
1
Move the < > arrow to the < >
icon.
•
Look at the LCD panel and press the
<>
button.
()
The frame counter will show “”.
2
Set the desired number of
multiple exposures.
•
Turn the < > dial.
3
Take the picture.
After you take all the multiple
exposures, the film advances to the
next frame automatically and the
multiple-exposure setting is canceled.
Three multiple exposures
have been set above.
NNN E SEC3 (31-51) 02.5.11 11:17 AM Page 48