Filter
Top Products
89
3 White Balance CorrectionN
With just one shot, three images having a different color tone can be
recorded simultaneously. Based on the white balance mode’s standard
color temperature, the image will be bracketed with a blue/amber bias
or magenta/green bias. This is called white balance bracketing. White
balance bracketing is possible up to ±3 levels in single-level increments.
Set the white balance bracketing
amount.
In step 2 for white balance correction,
when you turn the <
6
> dial, the “ ”
mark on the screen will change to “ ”
(3 points). Turning the <
6
> dial to the
right sets the B/A bracketing, and turning
it to the left sets the M/G bracketing.
X
On the right side of the screen, “
BKT
”
indicates the bracketing direction and the
bracketing amount is also displayed.
Press <0> to exit the setting and
return to the menu.
To cancel the bracketing, set “BKT” to
“±0” (“ ” to “ ” (1 point)).
Bracketing Sequence
Correct white balance, blue bias, and amber bias. Or, correct white
balance, magenta bias, and green bias.
White Balance Auto Bracketing
B/A bias ±3 levels
If the image-recording quality is set to RAW or RAW+73, white balance
bracketing cannot be used.
With white balance bracketing set, the maximum burst will be fewer
during continuous shooting. The number of possible shots will also
decrease to about one-third the normal number.
Since three images are recorded for one shot, the CF card will take
longer to record the shot.
“BKT” stands for Bracketing.