Filter
Top Products
4
Indicators
The camera indicators will light or blink under the following conditions.
zPower/Mode Indicator
zIndicator
Attaching/Removing the Lens Cap
Squeeze both sides of the lens cap
(a), and remove (b).
Always replace the lens cap after
use.
• Attach the lens cap cord to the strap.
• Remove the lens cap before turning on the camera’s
power.
Never do the following while the indicator blinks red.
These actions may corrupt image data.
- Shake or jolt the camera
- Shut off the power, or open the memory card slot/battery
cover
Orange: Shooting mode
Green: Playback mode/Printer connection
Yellow: Computer connection
Blinking Red: Image recording/reading/erasing/transferring
(when connected to a computer)