Filter
Top Products
102
Just like with exposure compensation (p. 70), you can adjust the exposure
±2 stops in 1/3-stop increments when using the flash.
Choose ~.
● After pressing the m button, press the
op buttons to choose ~.
Make the setting.
● Press the qr buttons or turn the Ê dial to
choose the flash exposure compensation,
then press the m button.
X~ will appear on the screen.
The camera automatically changes the shutter speed or aperture value when the
flash fires to avoid overexposing and blowing out the highlights in the scene. In
the 4 tab, if [Safety FE] in [Flash Settings] is set to [Off], the shutter speed and
aperture value will not automatically adjust.
Adjusting the Flash Exposure
Compensation
You can also set the flash exposure compensation by pressing the n
button, choosing [Flash Settings] from the 4 tab and pressing the m
button. Then choose [Flash Exp. Comp] and press the qr buttons to
make the setting. Or, you can press the r button, then the n button
to display the settings screen.
Safety FE
COPY