Filter
Top Products
103
In D mode, you can choose 3 levels of flash output.
Set the camera to D mode.
Choose the flash output.
● After pressing the m button, press the
op buttons to choose ~.
Make the setting.
● Press the qr buttons or turn the Ê dial to
choose the flash output, then press the
m button.
When the camera detects the possibility that people have their eyes shut,
appears.
Choose [Blink Detection].
● Press the n button, choose the 4
tab, and then choose the [Blink Detection]
menu item. Press the qr buttons to
choose [On].
Shoot.
XWhen a person with shut eyes is detected,
a frame and appear.
Adjusting the Flash Output
• You can also set the flash output by pressing the n button,
choosing [Flash Settings] from the 4 tab, and then pressing the m
button. Choose [Flash Output] and press the qr buttons to make the
setting.
• In M and B modes, you can set the flash output if you choose the 4
tab, then [Flash Settings] and set the [Flash Mode] option to [Manual].
Checking for Shut Eyes
• In , " or modes, this function is only available for the last
image shot.
• Not available in W or , .
COPY