Canon SD1200 IS Camera Lens User Manual


 
12
Use the included charger to charge the battery.
Remove the cover.
Insert the battery.
Align the S marks on the battery and
charger, then insert the battery by sliding it
in and down .
Charge the battery.
For CB-2LY: Flip out the plug and plug
the charger into a power outlet .
For CB-2LYE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
XThe charge lamp lights red and charging
starts.
The charge lamp will light green when
charging has finished. Charging takes
approx. 1 hour and 55 minutes.
Remove the battery.
Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in and up .
Charging the Battery
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
COPY