Filter
Top Products
Changing Shooting Functions
143
Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
● Select [AF-assist Beam], then press the qr
buttons to select [Off].
Changing the Image Display Time
You can change the length of time the images display directly after shooting.
● Select [Review], then press the qr buttons to
select an option.
Changing the Image Display Right After
Shooting
You can change the image display that appears after shooting.
● Select [Review Info], then press the qr
buttons to select an option.
Off No image displays
Hold
The image displays until you press the
shutter button halfway.
Detailed Displays detailed information (p. 45).
Focus Check
The area inside the AF frame is
magnified, allowing you to check the
focus. The procedure is the same as in
“Checking the Focus” (p. 114).
(EC260) CDI-E403_Guide_E.book Page 143 Thursday, December 18, 2008 2:02 PM
COPY