Filter
Top Products
98
Just like with exposure compensation (p. 76), you can adjust the exposure
±2 stops in 1/3-stop increments when using the flash.
Select the flash exposure
compensation.
● Press the m button and select , then
press the m button again.
Make the setting.
● Press the op buttons or turn the  dial
to select the flash exposure
compensation, then press the m button.
You can select 3 levels of flash output.
Set the camera to h (p. 70).
Select the flash output.
● Press the m button and select , then
press the m button again.
Make the Setting.
● Press the op buttons or turn the  dial
to select flash output, then press the m
button.
Setting the Flash Exposure Compensation
•
In
M
and
B
shooting modes, set [Flash Mode] to [Auto] in advance (p. 97).
• You can also set the flash exposure compensation by pressing the
n button. Select [Flash Settings] from the 4 tab, then press the
m button. Use the qr buttons to make the setting.
Setting the Flash Output
• In M and B shooting modes, set [Flash Mode] to [Manual] in
advance (p. 97).
• You can also set the flash output by pressing the n button. Select
[Flash Settings] from the 4 tab, then press the m button. Use the qr
buttons to make the setting.
(EC260) CDI-E403_Guide_E.book Page 98 Thursday, December 18, 2008 2:02 PM
COPY